Photo © Gossen Metrawatt
Photo © Gossen Metrawatt

Kompaktregler und Modulare Regelsysteme

Kompaktregler und Modulare Regelsysteme

Many of our customers use compact controllers to regulate individual components at one point or another. These controllers are typically PID controllers and often regulate important process variables such as pressure, temperature, flow, etc.

Due to their universal applicability in a wide range of production areas, these individual controllers are very popular. However, they often lag behind in digitization. While these controllers control important process parameters, they do not typically communicate this information externally. This is where we can help. Many of these controllers support at least one communication protocol that our SPARK can speak. Even if this is not the case, the controller can often be replaced with an equivalent model.

Required Information:

  • Type number (found on the nameplate)

  • Slave ID (if Modbus)

Technologies Used (Selection):

  • Modbus RTU/TCP

  • RS-232 or RS-485

  • EtherNet/IP

  • Native protocol of ABB / BBC / Goerz / Gossen Metrawatt Camille Bauer compact controllers. This even allows us to integrate older devices, such as the R9000 control system from 1989.